JUMO HEATtemp värmemängsgivare med anslutningskabel för inbyggnad, typ DS/DL (90.2425)
Funktioner
- För temperaturer från 0...180°C
- Godkännande för värmemätare MID- och nationellt godkännande som utbytbara temperaturgivare
- Uppfyller kraven enligt EN 1434, AGFW FW202 och FW211
- Godkännande för kyla- och kombinerade kyla-/värmemätare
- Parade och certifierade
- Producerad enligt Modul D, MID certifierad (CE- och metrologi-märkta)
Beskrivning
Heat meter RTD temperature probes are used for temperature measurement in closed-loop pipe systems. Direct installation without additional sheath is recommended to achieve optimum thermal coupling to the medium to be measured in the heating system.The temperature probes are approved in accordance with the EU directive 2004/22/EC (MID) as well as according to the German calibration regulations (domestic approval).
Temperature probes type DS are used for pipes of a nominal width of less than 50 mm. Installation in ball valves has proven to be the optimum installation location. In addition, the system need not be discharged during installation and/or replacement once the valid calibration period has elapsed.
The temperature probes are available in paired and calibrated execution. The state-approved test body for heat KF2 is responsible for this. Moreover, the production is certified according to module D of MID, and the temperature probes are also available with the CE and metrology sign.