Anläggnings-resistanstermometer med anslutningskabel (90.2550)
Funktioner
- För temperaturer från -50...+260°C
- Med skyddsarmatur i olika material
- Enkel och snabb montering
- Låg termisk massa
Användningar
- For temperature measurements on closed pipe systems or other circular and flat surfaces
- Versions with hole allow additionally the screw-fitting to any surface, e.g. on heating platens
Beskrivning
RTD surface temperature probes with connection line are used for measuring temperatures on closed pipe systems and/or other round or level surfaces. There is no necessity for mechanical modification of the measurement location due to the easy installation via cable ties. The basic versions 902550/10 and 902550/11 provided with a hole for screw-fitting to any surfaces such as, e.g. heating platens are the exception.
An advantage to the indirect method of temperature measurement is that disruption of the flow stream is avoided. Additionally, the life of the RTD is not shortened by the effects of either pressure or chemicals.
The low thermal mass of the sensor means that there is very little influence of the sensor on the measured object. Thermal conductance paste is available to improve heat transfer. Large differences in temperature between the measured medium and the surrounding ambient air will influence the measurement. In such cases, we recommend additional insulation around the sensor.
The measuring insert is a Pt 100 temperature probe as per DIN EN 60 751, class B in 2-wire circuit as standard. Versions with Pt 500 or Pt 1000 are also possible.
Documentation
Andra intressanta/relevanta produkter
Tillbehör
Tillbehör Artiklar
| Artikelnummer | Produktbeskrivning | Pris / st |
|---|---|---|
| 00493675 | Montagesatz (Spannband und Waermeleitpaste) fuer Rohre bis max. 100 mm Durchmesser | pris efter förfrågan |
Artiklar i lager
| Artikelnummer | Produktbeskrivning | Pris / st | |
|---|---|---|---|
| 00065531 |
Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel, skyddsarmatur aluminium (25x50mm) Insatstemperatur: -50..+180°C Mätinsats: 1x Pt 100 i 2-ledare Kabellängd: 2500 Typtillsats knäckskyddsfjäder: med kabelavlastnings-fjäder |
pris efter förfrågan | |
| 00065548 |
Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel och fästborrning, skyddsarmatur rostfritt Insatstemperatur: -50..+260°C Mätinsats: 1x Pt 100 i 2-ledare Kabellängd: 2500 Typtillsats knäckskyddsfjäder: utan typtillsats |
pris efter förfrågan | |
| 00306774 |
Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel och fästborrning skyddsarmatur aluminium Insatstemperatur: -50..+260°C Mätinsats: 1x Pt 100 i 2-ledare Kabellängd: 2500 Typtillsats knäckskyddsfjäder: utan typtillsats |
pris efter förfrågan | |
| 00506998 |
Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel, skyddsarmatur aluminium (D10x26mm) Insatstemperatur: -5..+105°C / PVC Mätinsats: 1x Pt 100 i 2-ledare Kabellängd: 2500 Typtillsats knäckskyddsfjäder: utan typtillsats |
pris efter förfrågan | |
| 00507000 |
Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel, skyddsarmatur aluminium (D10x26mm) Insatstemperatur: -50..+180°C Mätinsats: 1x Pt 100 i 2-ledare Kabellängd: 2500 Typtillsats knäckskyddsfjäder: utan typtillsats |
pris efter förfrågan | |
| 00507006 |
Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel, skyddsarmatur aluminium (D10x26mm) Insatstemperatur: -50..+180°C Mätinsats: 1x Pt 1000 i 2-ledare Kabellängd: 2500 Typtillsats knäckskyddsfjäder: utan typtillsats |
pris efter förfrågan | |