Senaste Pressmeddelanden
-
JUMO mTRON T - Your System
Helsingborg, 01.05.2012JUMO mTRON T är ett modulärt system som använder Ethernet-baserat systembuss och en inbyggd PLC för decentraliserade automationsuppgifter.
-
JUMO TYA-200 Ny tyristor baserad på mikroprocessorteknik
Helsingborg, 01.05.2012Den nya tyristor kraftenheten från JUMO finns i två olika versioner: TYA-201 för enfas applikationer och TYA-202 för 3-fas applikationer i sparkoppling.
-
JUMO Säkerhetstemperaturbegränsare och vakt
Helsingborg, 01.05.2012Den nya säkerhetstemperaturbegränsaren (STB) och vakten (STW) från JUMO representerar den nyaste tekniska nivån och uppfyller de tekniska och ekonomiska kraven på funktionell säkerhet.
-
Ny innovativ frostskyddstermostat
Helsingborg, 01.05.2012Högt skydd och den senaste anslutningstekniken, samt frostskydd för stora ytor är de viktigaste egenskaperna för JUMO frostTHERM-AT. Frostskyddstermostaten övervakar temperaturen på luftintaget i ventilationen och luftkonditionering för att undvika skador orsakade av frost och isbildning.
-
JUMO dTRANS p32 tryckgivare för tillämpningar inom medicinteknik
Helsingborg, 01.05.2012JUMO dTRANS p32 tryckgivare är lämplig för alla applikationer, där torra, icke-korrosiva och icke-joniserande gaser spelar en roll.
-
New Hygrostats for Indoor Use
Helsingborg, 23.04.2012A new generation with a completely new design is now replacing the previous highly-successful and proven JUMO device series of indoor hygrostats. Development for the new device focused not only on flawless engineering, but also on the design of the indoor hygrostat. As a result, the new case not only features better key measuring technology data, but also impressive elegance, easy installation, and robustness.
-
Durability Guaranteed: JUMO MIDAS C18 SW Titanium Pressure Transmitter
Helsingborg, 23.04.2012Compact and sturdy design, outstanding signal stability, and long-lasting material durability enable the new JUMO MIDAS C18 SW pressure transmitter to record relative pressures in organic mediums and mediums containing chloride. As a result, it is especially suitable for laboratory technology or companies in the water and wastewater industry.
-
JUMO dTRANS T05 - Temperature Transmitter with USB Programming Interface
Helsingborg, 23.04.2012The JUMO dTRANS T05 represents the next generation of 2-wire temperature transmitters that introduce a USB interface for programming. The devices are available as head transmitters, for installation in a DIN terminal head form B (JUMO dTRANS T05B), as well as for mounting rail installations (JUMO dTRANS T05T).
-
JUMO AQUIS touch S - Innovative, Modular Multichannel Measuring Instrument for Liquid Analysis
Helsingborg, 23.04.2012Measure – display – control – record: Terms that have been closely associated with the JUMO brand for decades. Now an ongoing new development project by JUMO – the measuring and control specialist – has given them a new meaning. These four tasks have been combined into a single innovative device for a field that promises to gain importance in the future – liquid analysis.
-
JUMO exTHERM-AT - The Innovative, Explosion-protected, Surface-mounted Thermostat
Helsingborg, 23.04.2012The new JUMO exTHERM-AT surface-mounted thermostat draws on a long tradition of explosion-protected, surface-mounted thermostats from JUMO. It features three impressive qualities: Robustness, reliability, and flexibility. Robust – with an approved operating temperature as low as -55 °C. Reliable – proven by 250,000 tested switching cycles (temperature monitor). Flexible – thanks to a wide range of options for equipment and combinations.
-
JUMO mTRON T - Your System
Helsingborg, 19.04.2012JUMO mTRON T is the new measuring, control and automation system from JUMO with perfectly matched components. This modular system with its universal I/O modules, flexible connection technology and extensive communication, evaluation and automation software can be used in a wide variety of industries, including the food industry, furnace construction and mechanical engineering. Its high measuring accuracy and excellent control performance, as well as its rugged and easy to service mechanical design round off the offer for the user.
-
EHEDG certification for the hygienic inductive conductivity and temperature sensor JUMO tecLine Ci
Helsingborg, 06.04.2012The new conductivity sensor from JUMO, the tecLine Ci, is designed to conform to EHEDG guidelines, and meets the highest standards of hygiene. The conductivity sensor has an integrated, fast-responding Pt1000 temperature sensor, and is made from natural PEEK®, a special polymer that is used in medical technology. It is available with the usual process connections such as DN40/50 milk cone, clamp, VARIVENT®, SMS, etc.
-
Additions to the industry portal of the JUMO Group
Helsingborg, 22.03.2012The web page of the JUMO Group has been expanded. In addition to the product area, the page now also features the industry portal. This is designed to address our customers from different industries selectively. The portal offers many new options to help you find the right information and products especially for your application as quickly as possible.
-
JUMO Analytical Measurement extends the range of sensors for measuring the electrolytic conductivity of pure and ultra-pure water
Helsingborg, 22.03.2012The expansion of the successful JUMO tecLine Lf-VA series as per Data Sheet 202924 has seen the development of two new measuring cells (K = 0.1 and K = 0.01). Shortening the active measurement electrodes also allows them to be installed for smaller pipe diameters and lower sample volumes.
-
Compact pressure transmitters for the low pressure range
Helsingborg, 17.11.2011Precise in its measurements, steadfast in the face of the environment, unimpressed by time – the new MIDAS S06 from JUMO. Measuring pressure conditions in air intake and extraction systems, as well as filter monitoring or determining liquid levels in tanks and washers, needs equipment that measures as precisely as possible, is resistant to aggressive media, yet is also inexpensive.
-
Tryckgivare för tågapplikationer
Helsingborg, 20.10.2011Robusthet och pålitlighet, även under de tuffaste förhållanden, är egenskaper som präglar JUMOs nya tryckgivare MIDAS SR. Givaren kan monteras i broms-, tryckluft- eller klimatsystem. Användningsområdena är många! Trots att mätuppgifterna varierar, så ställs alltid höga krav vad gäller mättekniken, även vid hög vibrations- och chockbelastning, höga temperaturväxlingar mellan -40 till 100°C eller vid överspänning.
-
New flue gas temperature monitors (ATW) with DIN approval
Helsingborg, 21.07.2011The JUMO flue gas temperature monitor versions approved as per DIN EN 14597 can be used in virtually all areas of electro-mechanical temperature monitoring. They allow safe operation of heating systems while also assuming the most varied safety functions. They can, for instance, assist in controlling an extraction fan.
